Modify 11.1v 1500mAh Li-Po Battery w/ Deans Plugs (Battery, Charger & Liposack)
Modify 11.1v 1500mAh Li-Po Battery w/ Deans Plugs (Battery, Charger & Liposack) by Modify at The ICFG. MPN: BUNDLE. Hurry! Limited time offer. Offer valid only while supplies last. Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power
Milliampere Hours: 1500mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Deans
Discharge: 25c Continuous / 28c Burst
Recommended Fit: M4A1, MK36 series, MK5A5, SCAR, AUG, P90
- READ THIS BEFORE YOU PURCHASE THIS PRODUCT!
LipoSack Use Instructions:
1) Ensure that charger rate is properly set and polarity is correct.
2) Attach charging leads to battery.
3) Place battery in LipoSack towards the bottom.
4) Place LipoSack on non-flammable surface.
5) Route charge leads through vent at the top seam of the LipoSack.
6) Close top flap of LipoSack and press hook and loop closure fully closed.
7) Charge battery using proper charging practices.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable